An album link takes someone to a specific album. Use a direct album URL when you want them to open it on one service, or a multi-service page when they should choose where to listen.
If the album is not live yet, offer a supported advance action. Do not present an unreleased link as a playable album.
Table of content
Introduction
Key Takeaways
Which album link do you need?
When can you make and share it?
Get a direct link to the album
Create one page for several services
Example: check the page again at launch
Check the link as a listener
What sharing a link does not change
Frequently Asked Questions
Conclusion
Key Takeaways
For a request about one service, copy the whole album's URL on that service, not an artist-profile or track link.
For a general announcement, use a multi-service page, then check that every button leads to the right album.
Before release, offer a pre-save or pre-add only where supported. An upcoming-release URI is not a playable album URL.
Test the shared URL as a listener, including destinations in the territories that matter to your audience.
Which album link do you need?
For a service-specific request, send a direct album link from Spotify, Apple Music or the requested service. For a general fan announcement, a multi-service album page gives listeners a choice of destinations.
Before launch, label any advance action accurately. Offer a supported pre-save or pre-add rather than a ‘Listen now’ button. Apple Music describes pre-add as adding an upcoming release to a listener's library or playlists, not playing an already released album.
For an approved advance listener, use a restricted stream instead of a public fan link. For example, Bandcamp Pro private streaming can give selected people access to a private or draft album.
An artist-profile link introduces your catalogue; a song link opens one track. Neither substitutes for the whole album. If a profile URL is what you need, use the Spotify artist link guide instead.
When can you make and share it?
First, deliver the album through your distributor. A link points to a release listing; it does not submit the recording to a listening service. If you have not delivered the album, start with how to distribute your release.
Before launch: Confirm the delivered artist, title, artwork and release date. Prepare an advance page only if its stated action works for your release.
On release day: Open the public album listings, copy the live album URLs and inspect or update your multi-service page.
After launch: Keep the shared page current when a destination is corrected or listeners report a problem.
If an upcoming Spotify release does not appear after delivery, ask your distributor or label rather than treating a missing public URL as a link-page problem. Spotify's upcoming-release guidance describes the listing as appearing after distributor or label delivery; it does not establish a universal waiting period.
Get a direct link to the album
Spotify: copy the album, not a track
On desktop, open the live album, select its three-dot menu or right-click it, then choose Share and Copy Album Link. On mobile, open the album, tap its three-dot menu, choose Share, then Copy link. These are Spotify's release-link instructions; open the copied URL to confirm it leads to the intended album.
Apple Music: use the album content link
Search for the album in Apple Music Marketing Tools, go to Content Link and choose Copy Link. Apple also offers a Short Link option. Check that the result opens the album, not a similarly named song.
If it is not live yet
In Spotify for Artists, check Music > Upcoming and use Copy URI if your delivered release appears there. Spotify identifies that URI for pre-save and marketing campaigns; it is not proof that a listener can play the album. If you cannot see the release, ask your distributor or label. Follow the Spotify upcoming-music instructions for that route.
Create one page for several services
A release-specific page is useful when your audience uses different services. Linkfire is one way to make one: its Release link can present an album on multiple services. The following controls are Linkfire's, not requirements set by the listening services.
Choose Release and enter a valid album URL. Linkfire also supports an album UPC as an input for this link type. Check the fetched artist, title and image before continuing.
Open Service destinations and inspect every detected match. Add a missing service or supply its direct album URL for a manual integration; do not assume a found match is the right release.
Set the public-facing title, image and listening prompt, then copy the page's share URL. Open that URL outside your editing view and follow each intended button.
Check destinations in the countries you intend to reach. Linkfire notes that territories can have different store URLs or missing destinations. A button that works for you may not work for every listener.
Do not publish a pre-save button without its release source: Linkfire's Pre-release link is separate from its Release link. For its pre-saves to work, add an album release source, such as the specified Spotify or Apple URL or a distributor-provided UPC, before the release date and time configured in the link. Linkfire says the page can change to a release page after a scheduled destination scan. Pre-release is available on specified plans. Test the advance action before sharing, then check the playable destinations after launch.
You may already have a page through your distributor. For DistroKid uploads, HyperFollow is created automatically, offers Spotify pre-save before release and adds streaming-service links when the release goes live. Inspect its destinations as you would any other page; this is a DistroKid feature, not a promise about every distributor.
Example: check the page again at launch
Mira is preparing the fictional album North Window. She compares its delivered artist name, title, artwork and release date with her announcement. Only after confirming that her advance-page button performs an available pre-save does she call it ‘Pre-save North Window’, rather than ‘Listen now’.
On release day, Mira copies the live Spotify album URL and checks the Spotify and Apple Music buttons on her multi-service page. The Apple Music button opens the lead single, so she replaces it with the North Window album URL. She changes the prompt to ‘Listen to the album’, then asks a friend to open the share URL on another device and check both album destinations and their tracklists.
Check the link as a listener
Open the exact URL you plan to publish in a logged-out browser or on another device. Inspect its shared preview, then follow each button that matters to your audience.
Wrong artist, album or single? Compare the destination's artist, title, artwork and tracklist with your release. Replace a mistaken match or song-level URL with the correct album URL.
Unavailable destination? Check the intended listener territory. Correct a wrong button URL; if the service listing itself is unavailable where it should be, raise that with your distributor.
Old prompt or artwork? Change ‘Pre-save’ to a listening prompt once the album is live, and inspect the page image and shared preview before reusing the URL.
A link-page edit cannot fix the underlying album listing. If Spotify shows the wrong title, artwork, release date, track order or country availability, ask your label or distributor to send a metadata update. Keep the public page accurate while that correction is handled.
Recheck reported failures after launch. Keep the same share URL only while its destinations and wording match what listeners can do. Use link-page visit data to assess page use, and consult the relevant music-service reporting for listening or sales.

What sharing a link does not change
Sharing an album URL does not give you permission to distribute a recording or its artwork. Keep rights clearance separate from the link you send.
A click is not a stream, purchase or royalty. Spotify's royalties guide ties its royalty explanation to music being streamed and distinguishes recording from publishing rightsholders. Treat page visits and listening figures as different measurements, without assuming a particular result from sharing.
Frequently Asked Questions
Can I make an album link before release day?
Yes. You can prepare a page with a supported advance action, but do not call it a playable album link until the public destinations work. If your delivered album appears under Spotify for Artists Music > Upcoming, its Copy URI option can support a pre-save campaign. For the campaign itself, see the pre-save guide.
What do I need to start a multi-service page?
It depends on the tool. For a Linkfire Release link, start with a valid album URL or its supported album UPC input. Have the correct artist name, title, artwork and intended service destinations to hand so you can check what the page finds; an advance page is a separate choice.
How do I correct a button that opens a song instead of the album?
Check the source URL and that service's destination. Replace any song-level destination with a verified album URL, then reopen the public share link and check the artist and tracklist.
Can I use the same page after the album goes live?
Yes, if your provider lets you update it or converts it appropriately. Linkfire describes a pre-release page that can turn into a release page after its scheduled destination scan, while DistroKid says HyperFollow adds streaming links after release. In either case, check the live buttons and change any advance-only wording before reusing the URL.
Where should I put the checked URL?
Put it where the intended audience will use it: an album-specific announcement, your website or approved press materials. For planning the wider announcement rather than the link itself, see how to announce a new album.
Conclusion
Choose a direct album URL or a multi-service page for the message you are sending. Check every intended destination as a listener, then share the verified URL.
Subscribe to our newsletter
Stay updated with the latest Muso news, tips, and success stories. Subscribe to our newsletter and never miss an update!




